FREE Shipping on Selected Items!

CX5 CX8 CX9 Interior Clear TPU Film Protection LHD RHD

Sale price ₱900.00 Regular price ₱1,500.00

Shipping calculated at checkout.


  • Clear Film material
  • Avoid the surface from getting scratches
  • Hide existing scratches, make your panel looks brand new again
  • Will last for many years!
  • For Head unit screen size, available in 7"(old model), 8" and 10" size

Note: For North America models, front passenger TPU panel has no slot for lock/unlock button. You need cut a slot for it.

LHD - Steering wheel on the LEFT side like most of the countries

RHD - Steering wheel on the RIGHT side like Australia, Thailand, Japan et



Before and After TPU Application 

Note: After few days the film will be cured and all surface are completely clear. 

  • CX5 Transmission Panel
  • CX5 Window Panel without Chrome Lining usually installed 18-21 model. Please check first!
  • CX5 Window Panel with Chrome Lining usually installed in refreshed CX5 22-23 model. Please check first.
  • CX8 Transmission Panel
  • CX8 Window Panel with Chrome Lining
  • Dashline for CX5 and CX8

  • Door Line for CX5 and CX8
  • CX9 Transmission Panel LHD/RHD Model
  • CX9 Window Panel


  • Head Unit 7" Screen
  • Head Unit 10" Screen (2022 Model)



1. Prepare the spray bottle put water inside with 1 drop of liquid soap. Shake it.

2. Spray the panel surface and clean with microfiber cloth. Make sure no more dirt or any particles left. Close the door and window.

3. Spray again the panel and back of the TPU clear film. Make sure its dripping wet so you can slide it easily.

4. Put the TPU on top of the panel and fit it accordingly.

5. Spray again the top of the film to lubricate and also the squeegee tool. Draw out the trapped water inside to the sides. Scrape the squeegee in sequential pattern and not in random area to avoid trapped air bubble. 


  • When spraying make sure it is dripping wet. Do not just moist the surface. It's like installing a tint in a window.
  • For cluster TPU, put a paper tape on both sides and use it as a handle so you can adjust it easily before scraping. Start with the inner part, up and down going to the right, the go back to the center, up and down scrape going to the left.
  • After installation, it is normal see some white marks or tiny bubbles. They will be gone once the TPU has been cured for 3-5 days.
  • For trapped big bubble, try to pull up the TPU again gently. Spray the surface so it will lubricate.
  • Do not pull up the TPU very fast as the adhesive might get stick on the surface and detach from the TPU
  • Search some Youtube TPU guides if you are still confuse.